| 
 | 
 | 
 | 
 | 
 | 
  Black Silicon Carbide
  Green Silicon Carbide
  White Aluminum Oxide
  Brown Aluminum Oxide
  Calcined Alumina
  Reactive Grade Alumina
  Polishing Grade Calcined Alumina
  Sub Micron Alumina
  Nano Sized Alumina
  Sinterable Silicon Carbide Powders
  Refractory Materials
  Abrasive Media
   Boron Carbide
   Boron Carbide Powders
  Lapping Slurries
  Spherical Media
  Fumed Silica
  Cast Polymer Fillers
  Surplus Raw Materials
   
   
   
   
   
   
   
   
   
   
   

Boron Carbide Powders

Panadyne boron carbide powders are used in many industrial and military; Body Armor and Vehicular Armor applications. Sintering aids for Sinterable Silicon Carbide, lapping, Hot Pressed and Reaction Bonded Structural Ceramics, refractory additives, honing sticks and Neutron Absorption. Boron Carbide is offered in straight FEPA sizes and custom particle sizes. Lower cost refractory grades are also available.
 
Typical Analysis
B4C 96.17% min.
B2O3 0.50%

Total Boron

 76.55% min.
Total Carbon 19.5% min
Free Boron 0.24%
Free Carbon 1.27%
Si 0.15% max
Al 0.05%
Fe 0.20% max
pH 7.0
   
Specific Gravity 2.50
Crystal Structure Rhombohedral
Melting Point 2450 ° C
Hardness 9.25 mohs scale
   
Packaging Steel or fiber drums, plastic pails
   
  Each lot is certified by a quality lab reports.
 
 
Typical Sizing      

Boron Carbide is offered according to FEPA F Standards. Available micro grit sizes are: F240, F280, F320, F360, F400, F500, F600, F800, F1000, F1200

Standard macro grit and custom sizes such as: - 200F and –325 F as well as 12, 25 & 45 micron available upon request.
 
 


320 Constance Drive | Warminster | Pennsylvania | 18974 | P (215) 444-9315 | F (215) 444-9317
©2004-2005 Panadyne All Rights Reserved.  Terms and Conditions